China automotive bearing manufacturers

Monitoring; 4. 3. In order to improve China automotive bearing manufacturers life and reliability, it is necessary to cooperate with upstream bearing steel pipe factory, and through the improvement of heat treatment process, ordinary annealing is changed to isothermal annealing plus the bearing is working normally This is the total thickness of the shim needed to be filled, and then put the prepared shim between the bearing end cover and the end face of the bearing seat, and finally tighten the screws.

(3) When measuring the feeler gauge, the operation should be carried out according to the standard, and the method of rolling over the feeler gauge with a roller is not allowed. Maintenance of the bearing In order to make the bearing fully play and maintain its due performance for a long time, it is necessary to do regular maintenance

The smaller the bearing running clearance, the better the guidance of the rolling elements in the no-load area, and the lower the noise during bearing operation. Compensation for wear and sinking During operation, the wear and sinking of the bearing increase the clearance,

but it can be compensated by preload. Longer working life In some cases, bearing pairs with pre-load can improve operational reliability and prolong working life. Because an appropriate amount of preload can improve the bearing load distribution, it can increase its working life. This article was compiled and edited by Mobei.com (http:///) Previous: Next: Bearing Library: How to cool the hot lathe spindle bearing?

Megosztás a facebookon