robot bearing suppliers

1. The advantages and disadvantages of ceramic bearings 1.1. Advantages of ceramic bearings: The advantages of ceramic bearings are as follows: 1. Zero corrosion. Even in a corrosive working environment, our ceramic bearings are still barrier-free; they can withstand a corrosive working environment.

2. Tolerate the temperature difference at will. Regardless of whether the temperature suddenly rises or drops suddenly, our ceramic bearings have no effect at all; high and low temperature switching has no effect on ceramic bearings. 3. Not easy to deform.

Ceramic bearings rarely deform due to force, because ceramic bearings have a higher modulus of elasticity than steel. 4. Long service life. The density of the ceramic rolling ball is lower than that of steel, and the weight is naturally lighter, so the friction generated by the centrifugal force of the outer ring can be reduced, and the service life of the natural ceramic bearing is prolonged. 1.2. Disadvantages of ceramic bearings:

The disadvantages of ceramic bearings are as follows: 1. The processing is difficult and the cost is high; therefore, it is expensive. 2. Not resistant to impact; high hardness. 3. It cannot be "expanded and contracted by heat" with the equipment; no effect of temperature on ceramic bearings is both an advantage and a disadvantage. Second, the advantages and disadvantages of metal bearings over ceramic bearings 2.1.

The advantages of robot bearing suppliers over ceramic bearings: 1. Machining is simpler than ceramic bearings, so the cost is also lower. 2. It is more suitable to use ceramic bearings under certain equipment. 2.2. The disadvantages of metal bearings compared to ceramic bearings: 1. The service life is shorter than that of ceramic bearings. 

Megosztás a facebookon

automotive bearing suppliers

Its smaller viscous automotive bearing suppliers reduces fuel consumption, improves economic performance, and achieves the goal of environmental protection. With the continuous improvement of automobile processing accuracy, the era of relying on high-viscosity oil to achieve the sealing effect to fill the gap has become history.

In addition, remember the principle that lubricating oil products of different brands cannot be mixed. It will cause the vehicle's starting performance to deteriorate, so in winter, low viscosity and low condensation point oil should be selected. So how do we choose the oil according to the model and season to achieve the best effect? First of all, there is a tendency for the gap to shrink in winter due to thermal expansion and contraction, which increases the wear of moving parts

Normally, there are the following types of antifreeze: ethylene glycol and water antifreeze, alcohol and water antifreeze and glycerin and water antifreeze. (4) Different types of antifreeze and water can be added arbitrarily. The boiling point of ethylene glycol is 197. If the concentration exceeds 40%, it is easy to produce alcohol vapor and ignite.. (5) Antifreeze is usually toxic if it touches your hands or splashed on your face. The repair service station usually uses the original juice to add water, the concentration is about 70%, so that the antifreeze reaches the best condition. Antifreeze is generally toxic, such as glycol type, which is an organic solvent

Look at the logo. Often due to the shortage of individual small parts, the entire assembly components are scrapped. Although the appearance of inferior products is sometimes good, due to poor production technology, cracks, sand holes, slag inclusions, burrs or bruises are easy to appear. The materials of the original parts are qualified materials according to the design requirements, and the counterfeit products are mostly cheap and inferior materials.

 

Megosztás a facebookon